To prevent file duplication and avoid mal-use of DVD contents, DVD movie producers encrypted DVD by using DVD copy protection and encryption technologies. So those encrypted DVD files are region-limited, which means files that can be played in this country may not be played in another country. While it does help to stop piracy, but at the same time, it also prevents quite a few uses from ripping such protected DVDs for personal use. After all, DVD files are easy to be scratched, so many users prefer storing your treasured files by ripping it to other file formats as a backup. However, when it comes to protected DVD files, things just don’t work smoothly or don’t work at all.

So is it impossible to rip encrypted DVD to other possible video formats for playback? Actually, as long as you get a professional software, it will be as easy as pie. In this guide, we would like to introduce you 3 different tools to help you rip and convert encrypted DVD movies to protection-free video files in popular video formats like MP4, MKV, MOV, AVI, FLV, etc. so that you could easily play back encrypted DVD movies on any media player or device you prefer.

However, it should be noted that removing DVD decryption might violate local law upon copyright protection. We here are not going to advise you to decrypt DVD movies for business purpose. Instead, we only provide solutions for DVD copy removal, and we advise you to check the local law before you try to rip encrypted DVD movies. And the last but not the least, don’t decrypt DVD movies for any business use.

Part 1: How to Rip Encrypted DVD Files with Leawo DVD Ripper

As mentioned above, you need to adapt to a DVD ripping software tool to help you decrypt DVD copy-protection and then convert DVD movies to video files in general formats accepted by various media players and devices. To smoothly and independently rip encrypted DVD files, you can rely on this all-in-one DVD media converter - Leawo DVD Ripper, which allows you to rip DVD files to video files in any file format such as MKV, MP4, MPEG, AVI, FLV, MOV, etc. Moreover, while ripping the DVD file to any other file formats, you can also adjust the parameters of the target file, including resolution, frame rate and etc. After ripping the DVD file to your wanted file format, you can play it on the computer, iPhone, iPad or an Android device. Best of all, sophisticated program as this Leawo DVD Ripper is, it has a simple user interface, allowing users including computer novices to rip encrypted DVD files to any other file formats within a few simple clicks.

Download and install Leawo DVD Ripper on your computer (it’s a module of Leawo Prof. Media). Then, follow the below steps to learn how to rip and convert DVD movies to general videos with Leawo DVD Ripper in detail.

Step 1. After opening the installed software on the computer, hit the DVD Ripper option to continue. Or, you can hit the “Convert” option on the top panel. After that click on the “Add Blu-ray/DVD” option to load the DVD file that you want to burn.

rip-encrypted-dvd-01

Note: Three modes will be arranged on the main interface: Full Movie, Main Movie, and Custom Mode. Full Movie means all contents of the source DVD will be loaded including files like subtitle, audio track and many more. Main Movie means that the longest chapter of DVD content will be uploaded, and Custom Mode means that users can select chapters for loading as needed.
Step 2. Now, hit the drop-down box next to “Add Blu-ray/DVD” button and choose the Change option to select the output format under the Format tab.

rip-encrypted-dvd-02

Step 3. Then, edit more detailed information of the output file as wanted including video codec, channel, resolution and many more.

rip-encrypted-dvd-03

Step 4. Hit the OK option to save the settings and then the green icon of “Convert” option to continue. After that, specify an output location and hit the Convert icon at the bottom to start the process.

rip-encrypted-dvd-04

Now, just wait for the process to get completed within a little while. Then, the ripped DVD file will be saved on the computer and you can enjoy the playback without any hassle. See? With this almighty Leawo DVD Ripper, it is just a matter of a few simple clicks to rip encrypted DVD, either for better visual experience or backup purposes. So if this is what you are looking for, just get the right version and follow the steps as instructed in the above to give it a go!

Part 2: How to Rip Encrypted DVD Files via HandBrake

Speaking of a DVD ripper, the Handbrake software is widely welcomed by users, for it allows users to rip DVD files for free without any restriction. Out of the box, Handbrake can rip any DVD that isn’t copy protected, but almost all DVDs you buy in the store are copy protected. That means Handbrake actually can’t work most of the times since it can’t decrypt the copy-protected DVDs if a third party is not used.

rip-encrypted-dvd-with-handbrake-05

However, there are third-party DVD playback libraries that could recognize the DVD copy protection and then bypass it for unlimited playback, which could assist HandBrake to read your encrypted DVDs and then rip and convert encrypted DVD movies to general video files. Here we would like to recommend you with libdvdcss. Once you have installed libdvdcss on your computer, HandBrake would easily help you complete DVD to video conversion tasks, no matter the DVD file is protected or not.
The process to install libdvdcss is a little different for Windows and Mac users, so we’ll go through each one individually. Note that you don’t have to do this every time you rip a DVD - once libdvdcss is installed, you can skip the installation process each time you rip a new disc.
Install libdvdcss library on Windows computer:
1. Download libdvdcss onto your computer. It is available in both 32- and 64-bit versions. Download the right version according to your own computer.
2. Move the .dll file to the HandBrake program folder.

install-libdvdcss-on-win-06

3. After this, Handbrake will be able to read your encrypted DVDs.
Install libdvdcss library on Mac computer:
1. Download libdvdcss tool onto your Mac computer. If you’re using EI Captian, you need to use Homebrew to help you download libdvdcss on Mac.
2. Then, to install libdvdcss, press Command+Space and search for Terminal to launch a command line window. Then, type in brew install libdvdcss and hit enter.

install-libdvdcss-on-mac-07

3. Homebrew will download and install the libdvdcss library. Once you’re back at the command prompt, the library will be installed.

install-libdvdcss-on-mac-08

Now, with libdvdcss successfully installed on your computer, follow the below steps to learn how to rip encrypted DVD to video with HandBrake:
Step 1: Open Handbrake and choose your DVD drive from the sidebar that appears.
Step 2: Under Destination, click Browse to pick where you want to place the movie after you’ve ripped it.
Step 3: Under Output Settings panel, choose output format in the “Container” box. If you need, you could adjust output video parameters in the following box.
Step 4: Click the “Start Encode” button to start to rip encrypted DVD movies to general videos.
You could then view the whole converting process at the bottom. HandBrake could help you easily convert encrypted DVD file to general videos. However, even if a third-party DVD reader library like libdvdscc is installed, it cannot assure the smooth and stable performance in ripping and decrypting encrypted DVDs with HandBrake. Quite a few users complain that Handbrake fails to find the valid source, Handbrake audio video out of sync problem, Handbrake error in ripping 99 title DVD and etc.

Part 3: How to Rip Encrypted DVD Files using MakeMKV

Some people might want to try MakeMKV for ripping encrypted DVD files and converting DVD files to general videos. As a professional and free media converter suite, MakeMKV could help you easily rip and convert DVD movies to MKV video formats for different uses.

rip-encrypted-dvd-makemkv-09

The below steps would show you how to rip encrypted DVD files to videos by using MakeMKV in detail:
1. Download and install MakeMKV on your computer.
2. Get source DVD files ready (insert disc into the disc drive if you are going to convert DVD disc to video).
3. Launch MakeMKV and then click the “File” button.
4. Click “Open disc” button to open DVD disc from disc drive and then select which title(s) you want to rip and convert.
5. After that, click the “Make MKV” button to start to convert encrypted DVD files to MKV files.
Apparently, Leawo DVD Ripper, HandBrake and MakeMKV could all help you rip encrypted DVD files to general videos. However, you could easily see that HandBrake requires more operation and MakeMKV only outputs MKV files. Meanwhile, both HandBrake and MakeMKV are not stable as Leawo DVD Ripper. Leawo DVD Ripper could not only help you rip encrypted DVD files to general video files, but also edit DVD movies, apply 3D movie effect, select subtitles and audio tracks, etc. Leawo DVD Ripper is the best choice for you.