There is no doubt that iPads are one of the most popular products in the market so far. While offering smooth operations, the iPad is able to carry out miscellaneous features by tons of handy apps. However, many users find that the iPad keeps restarting when running some programs. Such issues seem common as more and more people begin to ask for help. Why does my iPad keep restarting? The reasons can vary from hardware to software. If you run into these annoying situations, this article contains a couple of methods for you to troubleshoot the problem.

Fix 1: Force restart your iPad

Why does my iPad keep restarting? The first cause is most likely to be software conflicts. When you are wondering what to do with this condition, you should try to force restart your iPad as this method is useful for a wide range of issues. In other words, this solution can be seen as a universal means to fix problems at the first hand. If you are not sure how to do it while the iPad keeps restarting, here is a guide to follow. Note that this operation is different from simply turning off and on again.

Distinguish the iPad model with the Face ID feature as two different operations are required. If your iPad has the Face ID feature, then you should follow these steps.

Step 1. Hold down and release the Volume Up button quickly.

Step 2. Hold down and release the Volume Down button in a short time.

Step 3. Press and hold the Power button on another side of the iPad for about 8 seconds. You can let go of the button when the Apple icon shows up on the screen. Then the iPad will begin force-restart.

For the iPad with a Home button, you need to stick with this instruction.

Step 1. At first, press and retain the Home button.

Step 2. When holding down the Home button, press and keep the Sleep/Wake button.

Step 3. Maintain both buttons for approximately 10 seconds so that the force restart mode will be activated when the Apple icon displays.

Fix 2: Charge your iPad for a while

Sometimes, your iPad keeps restarting because the battery power is low or running out of it. This will trigger the iPad to reboot. If you still cannot figure out the question "why does my iPad keep restarting", you may want to try this second method. As one of the simplest solutions, all you need to prepare is an Apple-approved USB cable line, and we are going to charge the iPad for some time. It is suggested to shut down all the running programs. Follow the guide below to make sure your iPad has sufficient power.

Step 1. Confirm the general condition of the USB cable and the adapter so that it will work properly to charge your iPad. Check out the power outlet.

Step 2. Connect one end of the USB wire to your IPad.

Step 3. Plugin another end of the cable to the outlet with the adapter. Make sure they are connecting tightly.

Step 4. You will see a charging sign when it is successfully connected to the outlet. Charge your iPad for at least one hour. Restart your iPad and check with the same issue.

Fix 3: Update all your apps and iOS

After trying to force restart and charge your iPad, it is still possible that your iPad keeps restarting. Under this situation, you need to update the iOS system or the apps that you are using. This method is considered as an easy way to address a lot of errors and bugs while optimizing the system. Note that this operation has potential risks of data loss. That is to say, iPad users are suggested to back up the iPad in advance. You can reserve your iPad to iTunes, iCloud, and other tools. Later on, you can restore the configurations and other files after updating the system or certain applications.

There are two ways to update the iOS system. One is to update on the iPad, whereas another one is via iTunes. If you prefer to update without a computer, follow this guide.

Step 1. Go to the Settings app from the Home screen. Then navigate to the General title.

Step 2. Tap the Software Update under the General menu. If there is a new update available, you can see a notification at the end of the bar.

Step 3. When an update is downloaded, you are enabled to select Install Now. The process will go on automatically.

There is also a guide to update your iPad by iTunes when the iPad keeps restarting.

Step 1. Use a USB cable to connect your iPad to a computer with the latest iTunes program.

Step 2. Run iTunes and let it detect the iPad. Navigate to the device button and select the device.

Step 3. Click on the Summary tab. Select Check for Update to see if there is the latest version. Confirm to update the iOS system if it is available.

Fix 4: Reset all your iPad settings

Maybe the methods mentioned above are still not working for you, and you can reset all the iPad settings. This solution is also called the factory reset that will make your iPad turn back to when you just purchased it. Notice that your iPad would face the possible data loss issue during this process. In case of missing data, it is strongly advised to backup your iPad before following the steps below.

Step 1. Go to the Settings from the Home screen.

Step 2. Tap General.

Step 3. Move down to the bottom and a Reset option will be observed. Choose this item for further menu.

Step 4. Under this Reset menu, you should look for the first option of "Reset All Settings.” Tap it to verify your password and finish the process.

Fix 5: Restore your iPad in recovery mode

Your iPad keeps restarting could be correlated to unstable running environments. A handy strategy is to restore the iPad in recovery mode. If you have previous backup files on the computer, your iPad will be recovered with the latest backup. But keep in mind that this performance will wipe out all the personal data and media files on the iPad. Therefore, it is necessary to backup your iPad on the computer.

For iPad with Face ID functions:

Step 1. Make sure your iTunes is the latest version on the PC.

Step 2. Press and hold the Top button and either Volume Down or Volume Up button at the same time to call out the power off slider. Drag the slider to turn off the iPad.

Step 3. Launch iTunes. In the meantime, connect your iPad to the computer using a USB cable while holding down the Top button.

Step 4. When you see the recovery mode is displaying, let go of the Top button. Confirm the operation on iTunes to proceed with recovery mode.

For iPad with Home button:

Step 1. Hold down the Power button for around 2 seconds to pull out the power-off bar. Slide to switch off the iPad.

Step 2. Open iTunes on the computer and prepare a USB cable to connect it with your iPad. Simultaneously, press and hold the Home button until you can see the recovery mode popping up on the screen.

Step 3. iTunes will prompt a dialog to ask you if you want to restore the iPad. Click Restore to complete it.

Bonus: How to recover data on your iPad

Understanding how to resolve the iPad keeps restarting, and there could be plenty of unexpected accidents occurring after conducting some methods like resetting or undergoing recovery mode. One of the most common situations is data loss. When you cannot find particular files on your iPad, the best way to retrieve them is through a professional program like Leawo iOS Data Recovery.

Leawo iOS Data Recovery is specialized in restoring 14 types of data on your iPad with high speed and stable performance, such as recovering deleted contacts from the iPad. As a secure application, users are allowed to recover missing data via three modes. The given preview will guarantee the accuracy of each file you need to recover. No matter what the cause is, the universal software will take care of all your personal information and help recover without risks. What's more, it is compatible with other iOS devices like the iPhone and iPod Touch.

  • ios-data-recovery
  • Leawo iOS Data Recovery

    - Recover multiple deleted data directly from iPhone/iPad/iPod touch
    - Extract and export 12 types of files from previous iTunes&iCloud backup
    - Back up 12 kinds of data on iOS devices to computer
    - Recover data lost due to jailbreak, iOS upgrade, deletion, etc.

This simple guide will be of great assistance.

Step 1. Download Leawo iOS Data Recovery. Run the program immediately after the installation. Select a recovery mode according to different conditions when you enter the main interface. Connect your iPad to the computer if you choose to recover from the iOS device.

Step 2. Match the device type to your iPad. When reaching the panel of the iOS recover mode, you need to select the corresponding model in the bottom list and hit Start to scan missing data.

Step 3. You will have a preview session where you can select preferred files to recover. Then click on the Recover button to assign a destination. Hit Go to start.